- Located between the fender and the tire
- Helps shield your vehicle from small rocks and other road debris
- Replace when cracked or broken
On your Nissan, the fender can provide protection for your undercarriage and wheels from flying debris, shield nearby people or vehicles from rocks and pebbles that might deflect from your moving tires, and protect your vehicle's frame if you're involved in a minor collision.
On quite a few Nissan models, the fender is made up of several distinct parts, including a Fender Splash Shield (Left, Front). Specifically, the Nissan fender splash shield is mounted inside the wheel well, and creates a barrier between your tire and the rest of the fender. Fender splash shields are made-to-fit to fit only in certain locations on your car: driver-side front, driver-side rear, passenger-side front, or passenger-side rear. They're also made for use in particular years and models of Nissan vehicles.
Because of where they're mounted within your wheel well, the Fender Splash Shield (Left, Front) serves as your first layer of protection from flying rocks or debris. As an example, if a truck drives beside your Nissan and kicks a rock up straight toward your wheel well, your Fender Splash Shield (Left, Front) helps prevent the rock from bouncing into the undercarriage, brake system, or headlight assembly. Plus, this shield can help protect these parts from outside elements, which can help delay wear and tear.
Over time, when exposed to moisture, rain, ice, and road salt, your Nissan Fender Splash Shield (Left, Front) can break down, losing its ability to protect your vehicle's undercarriage components. Keep in mind, it may also have cracks or chips if you hit a curb by accident or drive through a pothole while you're driving at a high speed. When broken, your Fender Splash Shield (Left, Front) can leave part of your vehicle vulnerable to debris, and it will probably generate a grinding or tapping sound if a piece breaks off and flutters against the tires.
Here's the thing, though: replacing one of the fender splash shields on your Nissan is easy and inexpensive. You'll need a replacement Fender Splash Shield (Left, Front) that fits your Nissa perfectly, so it's wise to buy an authentic part from Nissan Parts. Depending on your specific vehicle, the process of installing your new part may be slightly different. For most vehicles, you'll just need to have a screwdriver, fasteners, and your Nissan owner's manual.
You'll start by allowing your car to cool down for several minutes. Then, take off the bolts and clips that are attached to your current fender shield. If you're planning to reuse the fasteners, set these small pieces aside (usually, it's advisable to go ahead and buy new ones, just in case the old components are worn out). Dry fit the new Fender Splash Shield (Left, Front) by holding it in place, ensuring any holes and rivets are aligned with the holes on your fender. Once you're confident about the placement, screw or clip the Fender Splash Shield (Left, Front) into place and secure it! For help with this process, head to a local Nissan service center.
With a little bit of time and a made-to-fit Fender Splash Shield (Left, Front), your Nissan can be back up to speed with confidence! Buy top-quality Nissan fender splash shields and additional parts and accessories for your Nissan straight from the source. This part fits your Nissan 370Z. See the What This Fits link to learn more.
PROTECTOR-FRONT FENDER,FRONT LH
Fits 370Z, Z